Tensile Test

Air grip
Controller 50N 500N 20kN wedge type
t is produced in accordance with each load specifications.

Special film chuck
This is used for testing beyond 500N load or for sample width of over 50mm.
Special flat chuck
Special flat chuck designed for high load.
Optical fiber attachment
This chuck is specially designed for pulling test of optical fiber.
The diameter of the drums is made big in comparison with that of the standard wire winding grip.
(on the photo, φ50mm)

Woven and knitted fabrics test attachment
In accordance with the 'JIS L 1096 Testing method for woven and knitted fabrics'.
Tape tensile test attachment
IThis jig is to hook wires in ring-shape.
The examination that was put in a liquid
It is a jig performing a pulling examination in a liquid.
Here show has a structure that after fixing a sample both from the top and the bottom, the vessel with liquid in it is to be lifted up and the sample is to get into the liquid.

Attachment for lead-free solder
In accordance with 'JIS Z 3198-6'.
Attachment for wire ring
Die casting pulling attachment
This jig is designed according to the specific shape of a sample, enabling its pulling test.

The (objective) jig measures force to uncork the wine.