IMADA-SS Universal Testing Machine enables you to measure and evaluate the strength of the various materials, such as metal, rubber, plastic, ceramic and the other industrial products in many fields.
We have SV-type, SH-type, SDWS-type, SDW-type, SDT-type, Special-type, and Push-Pull stand. Each type has its features. Please select a right type which meets your testing requirement.
■General Description of the Function ■About an Operation Panel
Select by the maximum loads
Max. Load
below 500N		 Max. Load
between 1 to 3kN		 Max. Load
between 5kN to 10kN		 Max. Load
between 10kN to 100kN
[SV-type]
　

Load-cell is attached to the elevating axis. This machine has the following features.

○Good Workability. Since this has one elevating axis, there's enough working space in sideways and front of the machine.
○Easy positioning of the loadcell enables the testing of long-length samples.
○Good Portability. This SV-type machine is designed to be used on the table and it's very compact.
○Easy Operation.

Maximum load of the SV-type can be chosen from 2N(0.2kgf) to 3000N(300kgf). This variation make this Universal Testing Machine possible to measure very little load such as semi-conductor testing, and mid-range strength such as machine parts.
[SH-type]
　 Horizontal type testing machine. It is suitable for the horizontal direction testing, such as measuring of the peeling, friction strength of the microchip.
[SDWS/SDW-type]
　 Feeding screw on both sides of the gate-type frame moves the crosshead up and down. This Universal Testing Machine is used when relatively large maximum loads and long stroke are needed. SDWS is a desktop type, and SDW is to be installed on the stable floor.
[SDT-type]
　 Load cell moves up and down in parallel with the vertical frame. It is suitable for the testing which requires long stroke such as rubber, tape, and other long and lean materials.
[Special-type]
　 We design the special-type Testing Machine and Torque Testing machine in such fields as Electronic, Electron, Automobile, Ceramic, and Food. Please contact us and tell us your special needs.
[Push-Pull Stand]
　 Hand-held Push-Pull Scale or Digital Force Gauge can be attached to this Push-Pull Stand, and to be used as simple tensile and pressure testing machine. The measurement value is stable compared to the hand-held type.

■Comparison by Maximum Load ■Comparison by Stroke Length
*Indicating the standard load of each type. It is possible to use lower loads for each type. For example, 500N load range can be added to SDW type testing machine.
*Indicating the standard stroke of each type. Special specification is possible.