Caution when choosing the right attachment / Installation size list
■ Caution when choosing the right attachment
○Testing load has to be lower than the maximum load of the attachment.
○The weight of the upper attachment has to be lower than the 10% of the maximum load of the loadcell.
If the maximum load of the loadcell is very small, it is recommended to adjust the testing machine with the attachment attached being placed.
○Make sure the size of the connecting rod is correct. Chart below shows the size of the screw for upper / lower attachment.
○If you plan to test special materials, it is highly recommended to perform the sample testing to choose the right attachment.
■ Installation size list
1：The installation of the upper jig
The upper jig is installed to a loadcell.
The screw size is as follows.
The machine model to use a loadcell equal to or less than 500N is for a male screw, and the jig side get the female screw.
The machine model to use loadcell more than 1kN is for a female screw, and the jig side get the female screw.
The jig side gets the male screw.
Load
Model
Under 500N
SV-55CB
SVZ-201F-50
SDT-204F-50
1kN〜10kN
SVZ-201F-100/200
SDT-204F-100-200
SDT-504F
SDW-002F
SDW-005F
SDW-010F
20kN
SDW-020F
50kN
SDW-050F
100kN
SDW-100F
Screw size
M6P1
M12P1.75
M16P1.5
M24P2
M32P2
※When a jig of the small capacity is installed with the additional load range, The joint screw is necessary.
2：The installation of the lower jig
The surface plate with T-Groove to fix lower jig is situated on the base of testing machine.
Two T-throw nuts are to be inserted into the T-Groove and fix a jig onto them with two bolts.
The dimension of the T-Groove and the size of the bolt are as follows.
※1 : There is only screw holes for mounting for SV-55CB type. SV-55CB type can be installed with T-groove table with additional option.
Model
SV-55CB(※1)
SVZ-201F
SDT-204F
SDT-504F
SDW-002F
SDW-005F
SDW-010F
SDW-020F
SDW-050F
SDW-100F
Ｔ-nut
Ｔ Groove size
M8P1.25
M8P1.25
M12P1.75
M16P2
M20P2.5
IMADA SEISAKUSHO CO.,LTD 91-1 Hashira 6ban-cho,Toyohashi Aichi, 441-8058
Copyright(C) 2022 IMADA-SS Corporation. ALL Right Reserved
